What are you looking for?
Anti-Insect Yellow PVC
| Infused with natural citronella for insect-repellent effect |
| Insect-opaque yellow color acts as a visual deterrent |
| UV-stable and outdoor-rated for long-term performance |
| Non-toxic and compliant with food safety standards |
Format
- Roll, strips and panels
- Ribbed, reinforced, rounded edges, matte surface
About Anti-Insect Yellow
ANTI-INSECT YELLOW has been specially designed to provide insect-repellent properties to flexible PVC while maintaining all the existing qualities (clarity, brightness, durability, flexibility, and strong resistance to impact).
ANTI-INSECT YELLOW is infused with natural citronella, creating a repellent effect that deters insects from entering protected areas. The distinctive insect-opaque yellow color acts as a visual barrier while the citronella-infused material forms an effective, natural defense against flying pests. ANTI-INSECT YELLOW is non-toxic, compliant with food safety standards, and engineered for long-term outdoor performance.
ANTI-INSECT YELLOW is specifically recommended for strip doors, curtain doors, and partitions used in environments where insect control is critical. It effectively reduces insect infiltration in food production areas, hospitality settings, healthcare facilities, schools, factories, workshops, commercial shops, public buildings, and private residences.
The repellent agent within ANTI-INSECT YELLOW is a natural, non-toxic solution derived from citronella, widely used for pest control and recognized as safe for humans and food contact environments.
Applications
Technical datasheet
| Properties | Standard | Units | Standard | Description |
| Light transmittance | ASTM D 1003 | % | 85 | Visible light rate transmitted through the material. |
| Shore A hardness | EN ISO 868 | Sh A | 80 | Index based on a flat indenter's penetration depth. Scale from 0 (Soft) to 100 (Hard). |
| Tearing resistance | DIN 53515 | N/mm | 50 | Minimum tensile stress required to tear a pre-slit sample. |
| Tensile strength at break | ASTM D 638 EN ISO 527 | N/mm² | 16 | Maximum tensile stress that a material can be subjected to before break. |
| Elongation at break | % | 340 | Elongation of the specimen at the break point under tensile stress. | |
| Residual elong. (after break) | % | 68 | Permanent elongation of the specimen measured after rupture in a tensile test. | |
| Thermal conductivity | ASTM C 177 | W/m.K | 0,16 | Ability to conduct heat. The lower it is, the more insulation. |
| Cold bend brittle temp. | ISO 8570 | °C | -35 | Temperature at which the specimen break under torsion stress. Brittle point (CLASH & BERG). |
| Min. usage temp. | EN 1876 | °C | -15 | Temperature range where material keeps its mechanical properties (flexibility). |
| Max. usage temp. | °C | +50 | ||
| Specific heat capacity | ISO 11357 | kJ/kg.K | 1,6 | Heat energy required to increase the temperature of one kilogram of the material by one degree Celsius. |
| Sound reduction | DIN 52210 | dB | >35 | Average sound level (freq. 0,1 to 3,2 kHz) decreased by a 1,76 sq.m. and 5 mm thick PVC curtain. |
| Reaction to fire | EN 13501-1 | Class | - | Standard classifications of material self-extinguishing and resistance to combustion. |
| UV/IR filter | ISO 25980 | - | - | Ability to filter welding rays allowing the use of this material as a welding protection screen. |
| UV resistance | ISO4892 | - | Yes | Ability to resist to UV (Sun, welding arc). |
| Surface resistivity | ASTM D257 | .1010 Ω/□ | 30 | Material surface electric resistivity measured with a 100 V direct voltage. |
| Water absorption | EN ISO 62 | % | -0,2 | Material mass variation after exposure to humid conditions. (<0 if released / >0 if absorbed) |
| Anti-insect | - | - | Yes | Special ability to keep insects away.(Food processing, plants, tropical regions) |
| Density | ASTM D 792 | g/cm3 | 1,22 | Mass per unit volume. |