| EU-konform für Lebensmittelkontakt |
| FDA-konform |
| Transparenz |
| Wärmeisolierung |
| Schallisolierung |
| Lange Haltbarkeit |
| Umweltfreundlich & recycelbar |
| Min | Max | |
| Width | 200 mm | 1.6 m |
| Thickness | 2 mm | 3 mm |
| Length | 20 m | 50 m |
PVC für Lebensmittelkontakt entspricht den europäischen Verordnungen (1375/2004/EG und EU-10/2011) bzw. den FDA-Richtlinien.
Es ist die ideale Wahl, um die Lebensmittelsicherheit in verschiedenen Bereichen der Lebensmittelindustrie zu gewährleisten.
Diese spezielle PVC-Variante wird insbesondere für Anwendungen in der Lebensmittelindustrie empfohlen, in denen frische oder gefrorene Produkte verarbeitet werden, wie z. B. Lebensmittelproduktionsbetriebe, Schlachthöfe, Kühlfahrzeuge, Kühlhäuser und Supermärkte.



PVC für Lebensmittelkontakt wird sorgfältig entwickelt, um seine Lebensmittelsicherheit zu gewährleisten.
Dadurch ist sichergestellt, dass unser lebensmittelgeeignetes PVC bedenkenlos mit Lebensmitteln in Kontakt kommen kann und die Lebensmittel für den menschlichen Verzehr unbedenklich sind.
PVC für Lebensmittelkontakt wurde speziell für Anwendungen in der Lebensmittelindustrie entwickelt, insbesondere dort, wo frische oder gefrorene Produkte verarbeitet werden.


Die Verwendung von PVC für Lebensmittelkontakt garantiert die Vermeidung von Kontamination durch gefährliche Chemikalien in Ihren Lebensmitteln und Erzeugnissen.
Dies gibt Ihnen das Vertrauen, Extruflex PVC in der Nähe von Lebensmitteln und Getränken zu verwenden und die Sicherheit Ihrer Kunden und die Minderung potenzieller Geschäftsrisiken sicherzustellen.
Für PVC für Lebensmittelkontakt sowie für alle anderen Produktesetzt Extruflex seit Langem ausschließlich auf NON-PHTHALATE Weichmacher.
Dies gewährleistet höchste Sicherheit für die Nutzer.


Speziell für den Lebensmittelkontakt entwickelt, vereint es die herausragenden Eigenschaften von Extruflex, wie außergewöhnliche Klarheit, Transparenz und Langlebigkeit.
Es verhindert das Risiko der Kontamination von Lebensmitteln mit Chemikalien, ohne die Leistung zu beeinträchtigen.
PVC für Lebensmittelkontakt entspricht den europäischen Verordnungen (1375/2004/EG und EU-10/2011) sowie den FDA-Richtlinien.
| Properties | Standard | Units | Standard | Description |
| Light transmittance | ASTM D 1003 | % | 85 | Visible light rate transmitted through the material. |
| Shore A hardness | EN ISO 868 | Sh A | 80 | Index based on a flat indenter's penetration depth. Scale from 0 (Soft) to 100 (Hard). |
| Tearing resistance | DIN 53515 | N/mm | 50 | Minimum tensile stress required to tear a pre-slit sample. |
| Tensile strength at break | ASTM D 638 EN ISO 527 | N/mm² | 16 | Maximum tensile stress that a material can be subjected to before break. |
| Elongation at break | % | 340 | Elongation of the specimen at the break point under tensile stress. | |
| Residual elong. (after break) | % | 68 | Permanent elongation of the specimen measured after rupture in a tensile test. | |
| Thermal conductivity | ASTM C 177 | W/m.K | 0,16 | Ability to conduct heat. The lower it is, the more insulation. |
| Cold bend brittle temp. | ISO 8570 | °C | -35 | Temperature at which the specimen break under torsion stress. Brittle point (CLASH & BERG). |
| Min. usage temp. | EN 1876 | °C | -15 | Temperature range where material keeps its mechanical properties (flexibility). |
| Max. usage temp. | °C | +50 | ||
| Specific heat capacity | ISO 11357 | kJ/kg.K | 1,6 | Heat energy required to increase the temperature of one kilogram of the material by one degree Celsius. |
| Sound reduction | DIN 52210 | dB | >35 | Average sound level (freq. 0,1 to 3,2 kHz) decreased by a 1,76 sq.m. and 5 mm thick PVC curtain. |
| Reaction to fire | EN 13501-1 | Class | - | Standard classifications of material self-extinguishing and resistance to combustion. |
| UV/IR filter | ISO 25980 | - | - | Ability to filter welding rays allowing the use of this material as a welding protection screen. |
| UV resistance | ISO4892 | - | Yes | Ability to resist to UV (Sun, welding arc). |
| Surface resistivity | ASTM D257 | .1010 Ω/□ | 30 | Material surface electric resistivity measured with a 100 V direct voltage. |
| Water absorption | EN ISO 62 | % | -0,2 | Material mass variation after exposure to humid conditions. (<0 if released / >0 if absorbed) |
| Anti-insect | - | - | - | Special ability to keep insects away.(Food processing plants, tropical regions) |
| Density | ASTM D 792 | g/cm3 | 1,22 | Mass per unit volume. |