High thermal insulation | |
High flexibility at low temperature | |
Strong mechanical resistance down to -25°C | |
Energy and cost savings | |
Very high clarity/transparency | |
Environment friendly & recyclable |
Min | Max | |
Width | 75 mm | 2.2 m |
Thickness | 0.3 mm | 12 mm |
Length | 20 m | 100 m |
Extruflex's Polar PVC range (sometimes referred to as low-temperature PVC) can endure extremely cold temperatures, without becoming brittle or hard, preventing the PVC from breaking or tearing easily.
They are also less likely to roll up at the bottoms in colder temperatures.
Polar PVC maintains its flexibility and resistance to breaking and cracking and can be used both inside and outside where temperatures range from -25°C to +30°C and Super Polar -60°C to +15°C.
Polar PVC is the ideal solution for businesses working in refrigeration, cooling or offer applications used in extreme cold environments.
Polar PVC is commonly used in low-temperature environments because of its very high insulating power and ability to resist the negative effects that other ranges of PVC might experience in such cold temperatures.
The PVC stays flexible and resists breaking and cracking whether it be an inside or outside application where temperatures may vary wildly throughout the year.
Polar PVC is the ideal solution for businesses working in refrigeration and cooling.
Polar PVC is often used as strip curtains to act as a barrier in doorways, preventing the cold from escaping the freezer or cold room. This saves energy by keeping in the cold, while also keeping perishables fresher for longer.
Polar PVC has been manufactured to allow for the PVC to maintain its durability and flexibility and prevent the PVC from becoming brittle and cracking even when in extremely cold temperatures. They are also less likely to roll up at the bottoms in colder temperatures.
Polar PVC strips and panels maintain their flexibility and resistance to breaking and cracking in applications both inside and outside where temperatures can drop rapidly in winter months.
Polar PVC strip curtains or partitions allow traffic to pass through while still keeping the temperature consistent within the room.
PVC strip curtains always fall back, and close the gaps, after someone passes through them. This ensures that no airflow occurs and thus acts as an insulating barrier within the doorway.
This keeps the freezer or cold room cold and at a consistent temperature, even when frequent traffic passes through the doorway.
PVC strip curtains can also keep the cold out in really cold areas, thus keeping the warmth in, and thus lowering energy costs for heating or cooling
Flexible PVC has a variety of benefits and uses. It provides great insulation, keeping out the cold weather, and allowing you to save on your energy bills. When used as strip curtains they also allow for fast-flowing pedestrian or light-vehicle traffic to pass through doorways easily and quickly, while still protecting the indoors from the external weather conditions.
All Extruflex PVC is the highest quality PVC available on the market, having the best durability, flexibility, and resistance to impact and chemicals.
All Extruflex PVC is also 100% recyclable and non-phthalate! This means that they are safer for you to use and better for the planet.
In addition to all the great benefits that come with flexible PVC, Polar PVC has the added benefit of resisting really cold temperatures, keeping its softness, flexibility and durability even when exposed to extremely cold temperatures.
This is especially important in workplaces where the outside temperature can be cold and can be exposed to rain and wind.
Polar strip curtains and partitions can keep these extreme weather conditions out of the workplace, protecting workers and keeping heating bills down. This ensures that your workforce is comfortable, even in the colder months.
This is especially useful in warehouses or logistics warehouses where the doorways need to stay open to allow traffic and goods to pass through frequently.
PVC strip curtains can be installed to act as a barrier to keep the warmth in but still allow traffic to flow through the doorway freely and without issue.
Properties | Standard | Units | Standard | Description |
Light transmittance | ASTM D 1003 | % | 85 | Visible light rate transmitted through the material. |
Shore A hardness | EN ISO 868 | Sh A | 65 | Index based on a flat indenter's penetration depth. Scale from 0 (Soft) to 100 (Hard). |
Tearing resistance | DIN 53515 | N/mm | 28 | Minimum tensile stress required to tear a pre-slit sample. |
Tensile strength at break | ASTM D 638 EN ISO 527 | N/mm² | 12 | Maximum tensile stress that a material can be subjected to before break. |
Elongation at break | % | 390 | Elongation of the specimen at the break point under tensile stress. | |
Residual elong. (after break) | % | 76 | Permanent elongation of the specimen measured after rupture in a tensile test. | |
Thermal conductivity | ASTM C 177 | W/m.K | 0,16 | Ability to conduct heat. The Lower it is, the more insulation. |
Cold bend brittle temp. | ISO 8570 | °C | -40 | Temperature at which the specimen break under torsion stress. Brittle point (CLASH & BERG). |
Min. usage temp. | EN 1876 | °C | -25 | Temperature range where material keep its mechanical properties (flexibility). |
Max. usage temp. | °C | +30 | ||
Specific heat capacity | ISO 11357 | kJ/kg.K | 1,6 | Heat energy required to increase the temperature of one kilogram of the material by one degree Celsius. |
Sound reduction | DIN 52210 | dB | >35 | Average sound level (freq. 0,1 to 3,2 kHz) decreased by a 1,76 sq.m. and 5 mm thick PVC curtain. |
Reaction to fire | EN 13501-1 | Class | - | Standard classifications of material self-extinguishing and resistance to combustion. |
UV/IR filter | ISO 25980 | - | - | Ability to filter welding rays allowing the use of this material as a welding protection screen. |
UV resistance | ISO4892 | - | Yes | Ability to resist to UV (Sun, welding arc). |
Surface resistivity | ASTM D257 | .1010 Ω/□ | 3 | Material surface electric resistivity measured with a 100 V direct voltage. |
Water absorption | EN ISO 62 | % | -0,2 | Material mass variation after exposure to humid conditions. (<0 if released / >0 if absorbed) |
Anti-insect | - | - | - | Special ability to keep insects away.(Food processing plants, tropical regions) |
Density | ASTM D 792 | g/cm3 | 1,18 | Mass per unit volume. |
This information given to our customer in good faith to inform him and to help him in his search, does not constitute any formal or implicit guarantees as to its use.