阻燃PVC

Fire retardant PVC for strip doors and curtain doors

Fire retardant PVC for swing doors, rapid doors, roll-up doors and automatic doors

Transparent PVC films for tents, marquees, canopy boat and cars

	Fire retardant
	Transparency/clarity
	Noise insulation
	Long durability
	Impact & scratch resistance
	Environment friendly & recyclable

Formats

Films, strips, curtains and panels
Ribbed, reinforced, rounded edges, mat surface

	Min	Max
Width	75 mm	2.2 m
Thickness	0.3 mm	12 mm
Length	20 m	100 m

About Fire Retardant

Our Fire Retardant PVC range of products has fireproofing properties, to prevent the breakout and spread of accidental fires.

Fire Retardant PVC complies with regulations such as EUROCLASS, French M classification, German B classification or California Fire Marshal (CFM)

This is the perfect flexible PVC product if your environment needs fire-related protection or is exposed to an environment that needs to withstand a lot of heat. Extruflex's fire retardant PVC has all the same great qualities as the standard PVC product range, having the best clarity, brightness, durability and flexibility on the market.

产品用途

An orange forklift drives through a doorway with fire-retardant clear plastic strip curtains. The building has a green corrugated metal upper wall and a red corrugated lower wall with the number '2' painted on it. A single orange traffic cone is on the ground to the right of the forklift.

Inside a data center, a large cube-shaped enclosure made of clear plastic strips surrounds a section of server racks.

五金件

不锈钢挂钩与夹片配套

快装塑料挂钩

双轨系统

低温悬帘系统

平开门

节能轻装门

Why Use Fire Retardant PVC?

Fire Retardant PVC has a large number of applications and should be used as an alternative to standard PVC if there are risks of open flames and flammable materials near the PVC.

This prevents fires from starting or spreading.

Fire Retardant PVC complies with international regulations such as EUROCLASS, M classification, B classification, California Fire Marshal, etc.

Industrial strip doors with flexible PVC

Common Applications

Industrial warehousing
Commercial warehousing
Marquees
Partitions
Mining sector
Outdoor barbeque areas

Prevent Fires

Fire Retardant PVC is recommended, near campfires, forges, candles or fireplaces. The fire retardant properties of the PVC prevent fires from starting and are therefore a great option for certain use cases where being near open flames is a possibility.

Fire Retardant PVC doesn't ignite as easily as other PVC products on the market and is therefore extremely safe to use.

How Does Fire Retardant PVC Work ?

To stop a fire, simply remove or reduce one of the three components of the fire triangle:

Heat Elimination
Fuel Disposal
Oxygen Elimination

In soft PVC, the fire retardants can promote the formation of a stable char layer on the surface of PVC.

This char layer acts as a thermal barrier, reducing heat transfer (HEAT) to the underlying material and slowing down the release of flammable volatiles(FUEL).

Euroclass

The Euroclass B classification indicates that the materials have a very low contribution to fire, standing out for their low flammability and their ability not to spread flames quickly.

To obtain this classification, materials must pass standardized tests, as the SBI (Single Burning Item) test and the flame test, showing low flame spread and limited heat production.

In addition, additional parameters such as smoke production (s1, s2, s3) and formation of flaming droplets (d0, d1, d2) are added to detail the performance.

These materials are commonly used in buildings where fire safety is crucial and to comply with strict fire safety standards in Europe.

Extruflex Fire-Retardant PVC can meet Euroclass B,s3-d0 classification.

French M2 fire test

The M2 fire rating is a French classification that evaluates the reaction of materials to fire, indicating that they are difficult to ignite.

Part of a scale ranging from M0 (incombustible) to M4 (easily flammable), M2 materials do not catch fire easily and contribute minimally to the spread of flames.

CFM (California Fire Marshal)

The California Fire Marshal vertical test is a fire safety assessment used to evaluate the flame resistance of materials, particularly for building interiors.

In this test, a material sample is mounted vertically and exposed to a standardized flame for a set period to measure flame spread, burning rate, and the duration of afterflame and afterglow.

Equivalence Between European's Standard

Fire retardant equivalence between countries

Technical Datasheet

Properties	Standard	Units	Standard	Description
Light transmittance	ASTM D 1003	%	85	Visible light rate transmitted through the material.
Shore A hardness	EN ISO 868	Sh A	80	Index based on a flat indenter's penetration depth. Scale from 0 (Soft) to 100 (Hard).
Tearing resistance	DIN 53515	N/mm	65	Minimum tensile stress required to tear a pre-slit sample.
Tensile strength at break	ASTM D 638 EN ISO 527	N/mm²	20	Maximum tensile stress that a material can be subjected to before break.
Elongation at break		%	280	Elongation of the specimen at the break point under tensile stress.
Residual elong. (after break)		%	60	Permanent elongation of the specimen measured after rupture in a tensile test.
Thermal conductivity	ASTM C 177	W/m.K	0,16	Ability to conduct heat. The lower it is, the more insulation.
Cold bend brittle temp.	ISO 8570	°C	-20	Temperature at which the specimen break under torsion stress. Brittle point (CLASH & BERG).
Min. usage temp.	EN 1876	°C	0	Temperature range where material keeps its mechanical properties (flexibility).
Max. usage temp.	EN 1876	°C	+50
Specific heat capacity	ISO 11357	kJ/kg.K	1,6	Heat energy required to increase the temperature of one kilogram of the material by one degree Celsius.
Sound reduction	DIN 52210	dB	>35	Average sound level (freq. 0,1 to 3,2 kHz) decreased by a 1,76 sq.m. and 5 mm thick PVC curtain.
Reaction to fire	EN 13501-1	Class	C-s3,d0 B-s3, d0	Standard classifications of material self-extinguishing and resistance to combustion.
UV/IR filter	ISO 25980	-	-	Ability to filter welding rays allowing the use of this material as a welding protection screen.
UV resistance	ISO4892	-	Yes	Ability to resist to UV (Sun, welding arc).
Surface resistivity	ASTM D257	.10¹⁰ Ω/□	30	Material surface electric resistivity measured with a 100 V direct voltage.
Water absorption	EN ISO 62	%	-0,2	Material mass variation after exposure to humid conditions. (<0 if released / >0 if absorbed)
Anti-insect	-	-	-	Special ability to keep insects away.(Food processing plants, tropical regions)
Density	ASTM D 792	g/cm³	1,30	Mass per unit volume.

What are you looking for?