PVC cor mel

Flexible PVC roll for strip doors and curtain doors

Flexible PVC roll for swing doors, rapid doors, roll-up doors and automatic doors

Flexible matt PVC roll for strip doors and curtain doors

	Transparência/clareza
	Isolamento térmico
	Isolamento acústico
	Longa durabilidade
	Resistência a impactos e arranhões
	Ecológico e reciclável

Formatos

Bobinas, tiras, cortinas e lençóis
Bordas arredondadas e superfície fosca

	Min	Max
Width	75 mm	2.2 m
Thickness	0.3 mm	12 mm
Length	20 m	100 m

Qualidade Premium

Um PVC de cor mel de qualidade premium é denominado como PREMIUM “Vidro flexível”.

Este produto oferece clareza/transparência ideal que é alcançada através do uso de resina virgem selecionada, sem pigmento, que proporciona esta característica de clareza incrível e um tom neutro de PVC.

O PVC na cor mel é recomendado principalmente para aplicações internas que exigem uma aparência estética aprimorada.

Aplicações

A wide-angle interior view of a warehouse with tall blue and orange metal shelving racks on either side. In the center, a walkway is covered by a plastic chain link curtain.

An interior view of a building with two different doorways. On the left is a door with a clear top half and a solid blue bottom half. On the right, a wide doorway is covered with translucent golden-colored plastic strip curtains. The interior of a supermarket is visible through the curtains.

A large opening in a warehouse is covered by clear plastic strip curtains. Through the curtains, another large, industrial space with concrete walls and a blue metal door can be seen.

Hardware/Ferragem

Trilho e pendural Clássico

Quickmount

Trilhos para Cortinas Deslizantes

Cortina Rápida

Kit de Portas Flexíveis

ECOFLEX

Typical datasheet

Properties	Standard	Units	Standard	Description
Light transmittance	ASTM D 1003	%	85	Visible light rate transmitted through the material.
Shore A hardness	EN ISO 868	Sh A	80	Index based on a flat indenter's penetration depth. Scale from 0 (Soft) to 100 (Hard).
Tearing resistance	DIN 53515	N/mm	50	Minimum tensile stress required to tear a pre-slit sample.
Tensile strength at break	ASTM D 638 EN ISO 527	N/mm²	16	Maximum tensile stress that a material can be subjected to before break.
Elongation at break		%	340	Elongation of the specimen at the break point under tensile stress.
Residual elong. (after break)		%	68	Permanent elongation of the specimen measured after rupture in a tensile test.
Thermal conductivity	ASTM C 177	W/m.K	0,16	Ability to conduct heat. The lower it is, the more insulation.
Cold bend brittle temp.	ISO 8570	°C	-35	Temperature at which the specimen break under torsion stress. Brittle point (CLASH & BERG).
Min. usage temp.	EN 1876	°C	-15	Temperature range where material keeps its mechanical properties (flexibility).
Max. usage temp.	EN 1876	°C	+50
Specific heat capacity	ISO 11357	kJ/kg.K	1,6	Heat energy required to increase the temperature of one kilogram of the material by one degree Celsius.
Sound reduction	DIN 52210	dB	>35	Average sound level (freq. 0,1 to 3,2 kHz) decreased by a 1,76 sq.m. and 5 mm thick PVC curtain.
Reaction to fire	EN 13501-1	Class	-	Standard classifications of material self-extinguishing and resistance to combustion.
UV/IR filter	ISO 25980	-	-	Ability to filter welding rays allowing the use of this material as a welding protection screen.
UV resistance	ISO4892	-	Yes	Ability to resist to UV (Sun, welding arc).
Surface resistivity	ASTM D257	.10¹⁰ Ω/□	30	Material surface electric resistivity measured with a 100 V direct voltage.
Water absorption	EN ISO 62	%	-0,2	Material mass variation after exposure to humid conditions. (<0 if released / >0 if absorbed)
Anti-insect	-	-	-	Special ability to keep insects away.(Food processing plants, tropical regions)
Density	ASTM D 792	g/cm³	1,22	Mass per unit volume.

This information given to our customer in good faith to inform them and to help them in their search, does not constitute any formal or implicit guarantees as to its use.

What are you looking for?